Material: color steel ,FRP ,CFRT,plastic
Insulation Layer: Polyurethane foam or XPS, VIP
Hardware: 304 stainless steel
Material: color steel +Polyurethane foam
Outer box size: 1500*1000*1000 mm
Total volume: 951 L
Voltage: DC48V(45 Ah*4)
Temperature: -30℃
Structure: fiberglass+PU+fiberglass.
Panels thickness: 75-100mm
Insulation Layer: Polyurethane foam.
Hardware: 304 stainless steel
Temperature: –30℃
The main function of thermal insulation boards is to cut off the circulation of air and divide the compartment into different temperature sections. Based on different market demands, this product has five forms: BH001, BH002, BH003, BH004, and BH005.
08/05/2018 · Cold Room for Flowers is designed in a specific manner to keep the temperature and humidity at the appropriate level so that products can be maintained fresh and petals of the flowers stay fresh and good looking. To keep the petals of the flowers fresh and in good condition, air flow is controlled properly. 1, Superior quality; With advanced
Increasing the treatment temperature and time enhances foam expansion, Mn2O3 dissolution, and lowers the closed porosity. Once the foam reaches a
Features of Cold Room. Reliable customized solutions. Compact structure, robust construction. Polyurethane Foam Insulated Panels. Stainless steel door with low corrosion risk. Suitable for common and natural refrigerants. High Density Shelving. Wider temperature at -5°C ~ 10°C. Temperature Control sensor ±0.5°C.
01/02/2012 · The materials are key to the process. Unlike most phenolic foams, which are soft, crumbly and insubstantial (think green florist foam New for arranging flowers, for example), Acell foam is a combination of proprietary ingredients that form a much stronger structural foam in densities ranging from 80 to 800 kg/m 3 (5 to 50 lb/ft 3).The foam offers insulation value;
The TB foam is instead more elastic as shown by the shape of its compression curve. This behaviour could depend on the temperature, hence the internal pressure generated during foaming, decreasing when a surfactant is included in the formulation (Basso et al. 2013). Thus, the foam with the surfactant is more elastic and less brittle. Fig. 3.
Introduction of pu raw material two-component chemical foam Combination of polyether technical index / Two component Pu / polyurethane material Application: Suitable for spraying building wall,roof and injection sandwich panels,freezer,solar water heater etc. Parameter of pu raw material two-component chemical foam Item Specification Density ( kg/m ³ ) 30-40 ,
Polyurethane sandwich panel is a polyurethane insulation sandwich panel for construction, also known as anti-leakage sandwich roof panel, polyurethane rigid foam insulation board, polyurethane composite board, PU board, etc. It is a high-efficiency and energy-saving building envelope material with wide application and great potential.
26/10/2021 · EPS-FR Insulated Panels & PIR Insulated Panels PIR or Polyisocyanurate is a Fire Resistant, foam based core, meaning it can withstand fire and heat to a given temperature. It is generally yellow in colour and offers a higher thermal performance and thinner profile when compared to EPS-FR.
The refrigeration cold rooms ensure a temperature of -10 ° C or +5/+6 ° C, depending on the needs. They are useful for keeping food or soft drinks in shops or restaurants or medication, flowers and other products. Cold Rooms features: They are built of rigid polyurethane foam insulation panels
Insulation Layer: Polyurethane Foam Hardware: 304 stainless steel Temperature: - 30℃
Floral foam is produced as large block or slab by a batch process. The foam is easily cut and packaged with a minimum of loss due to waste. Floral foam is commonly New for living flowers, but is not New for dried and artificial flowers. Spray Foam. Production of foam by a spraying process using a resol–type composition has become possible.
Phenolic foam is considered one of the best material for thermal insulation . It has over 90% closed cell formation, giving it good stability. Phenolic foams come in varying densities in the range of 35 kg/m³ to 200 kg/m³. High density varieties such as insulation boards have good strength and are suitable for floor insulation .
High water resistance and compressive strength. Lightweight. Strong. High thermal insulation performance. Easy to cut and handle. XPS Multi-Use Foam Board is a high performance, water-resistant and lightweight board of extruded polystyrene (XPS) and can be New for a wide variety of applications: Insulation. • Rendered walls.
The PU Panel is one of the solution New for cold room, chiller room and freezer room due to its great thermal resistances characteristic. The PU panels are designed to install and assemble the cold room quickly by using embedded tongue-and-groove system. With this system, the panels are joined easily and securely.
APPLICATIONS All kinds of solutions for every industry Synthesia Technology offers integral solutions to the industry through its business units of: Polyurethane Systems, Polyester Polyols, Chemical Specialties and Raw Materials Distribution (America). The cohesion of science and innovation has allowed us to differentiate ourselves and focus much of the activity on the